A sewer inspection camera is a very useful tool in plumbing and construction projects, and one of the most revolutionary inventions of the past few decades. With it, you can quickly and accurately find the root cause of a clogged drain or sewer without relying on much guesswork and trial and error. Still, a good tool can only work best when used correctly. So here are 11 things to keep in mind when using a sewer inspection camera.
Tips for using a sewer inspection camera
Owning a high-quality sewer inspection camera will give you a huge advantage as a plumbing professional. However, having a tool does not mean you can make the most of it. The key is to understand how to use it correctly. Fortunately, these following tips will help you complete drain and sewer cleaning work more efficiently and ensure that your equipment stays in top condition for a long time, avoiding serious problems.
1. Never use short, quick movements
One of the most common mistakes when operating a sewer inspection camera is rushing to move the device quickly to smoothly go around bends and corners. This not only increases the risk of damage to the camera, but can also cause the equipment to malfunction. The correct method is to push the camera probe slowly and carefully to avoid damage caused by too fast operation, thus reducing expensive repair costs.
2. Never use violence on the sewer camera
Your sewer inspection camera is a semi-precise technological product, not to mention it is a major professional investment for your business. Although it is designed to be able to withstand many different things that may be found in the sewer or drain pipe, you should still treat your pipe camera as gently as possible. Under no circumstances should you use force. If you use force to correct the situation, the lens of your pipe camera and its cable may be seriously damaged, resulting in expensive repairs and downtime, preventing you from profiting from more sewer inspection work. Therefore, you want to push the insertion probe into the pipe easily while doing the work.
3. Don't immerse the sewer camera in liquid continuously
Although the sewer camera is designed for underwater operation, it still cannot be immersed in liquid for a long time. It should avoid prolonged contact with water and humid environments, especially prolonged immersion, whether it is an open-disc or closed-disc sewer camera. In addition, when the pipe camera is not currently being used for sewer and drain cleaning work, it should be stored in a dry place away from direct sunlight to prevent damage to the lens and other parts.
4. Always stand next to the drain outlet
During the operation of the sewer inspection camera, make sure that the operator always stands next to the drain it is detecting. When operating, always stand near the drain outlet. If the operator is too far away from the drain outlet during operation, it may cause accidental damage to the camera when it is pushed into the pipe. Make sure the operator stays as close to the pipe entrance as possible, which can effectively avoid unnecessary damage when adjusting the device.
5. Do not expose the sewer inspection camera to high temperatures
Another safety issue you should consider when maintaining the sewer inspection camera is not to expose it to high temperatures. Although the temperature resistance specifications of each device are different, it is recommended to check the user manual to ensure that the device is used within a safe temperature range.
6. Never bend the pipe
Also avoid bending the cable on the sewer inspection camera. It must never be entangled, as doing so will damage the fiber optic cable of the pipe camera, thereby reducing the image quality you get when looking for drain and sewer blockages. The cost of repairing it is quite high. When you are not currently using the sewer inspection camera, you should make sure to put it in a suitable storage box. You also need to make sure that the insertion tube is completely and safely inside the storage box when you close the lid.
7. Always keep the camera clean
There are many ways you can extend the life of your sewer camera, but one of the most important ways is to keep it as clean as possible. This helps prevent the accumulation of harmful substances such as oil, grease, and other types of residues that can damage your pipe camera lens. To do this, wipe the lens and probe connection part with a soft cloth in time after each use to ensure that it remains clean. In addition to this, you also need to keep the pipe camera lens clean.
8. Avoid using harsh chemicals
When cleaning the sewer camera lens, you should avoid using oil-based cleaners. Simply wipe the lens with a dry cloth to remove any debris and dirt. Soft linen cloth or lens cleaning paper can easily maintain the lens. Never use any harsh detergents or solvents to clean the sewer inspection camera, as this will cause serious and irreversible damage to the lens. You can also use a blower to blow dust off the pipe camera lens, but you should always make sure to avoid poking inside the camera. This can also cause damage.
9. Do a simple equipment check before you start
Before you start a sewer and drain cleaning job involving a sewer inspection camera, you need to make sure you do some preventative maintenance ahead of time. This means that before you start, you should do a quick and simple check of the equipment. Some general maintenance items you should check the pipe camera parts before each use include:
Is the camera head in good condition?
Is the power cord damaged?
Is the control screen displaying the picture normally?
Is the switch operation in good contact?
Is the cable damaged?
If you find any damaged equipment on the sewer camera, it should be repaired or replaced as soon as possible.
10. Don't use the camera as a tool to clear blockages
From time to time, you may be tempted to use a sewer inspection camera to clear blockages. This is something you want to avoid because the design of a pipe camera is similar to the cameras used for everyday things such as family photos. By using a sewer camera in this way, you may end up breaking the lens, which can lead to some expensive repairs. But it is important to remember that the camera should only be used to check and locate problems, and real blockage-clearing work requires the help of other specialized tools.
11. Ensure the display is clearly visible
When operating, try to avoid direct sunlight on the camera's display screen, as strong light will affect the clarity of the screen and even shorten the life of the display. If possible, adjust the angle of the display to avoid direct sunlight to ensure that you can see the screen content clearly, and it can also extend the life of the screen, thereby improving work efficiency.
By following these operating tips, you can not only improve the working effect of the sewer inspection camera but also effectively extend the life of the equipment. If you need more information about sewer inspection cameras, please feel free to contact us.
📧: info@bestdertech.com
📞: +(86)-186-6531-5008
